Blog Detail

Your HP printer might have a cartridge problem because of any dirt on the gold contact of the electronic chip or because it has been damaged. There might also be a problem with the cartridge, so you can also try a new or an old cartridge and see if the printer shows the same problem or not. 

How do you fix an HP printer Cartridge error?

There might be many reasons your HP printer is showing a cartridge error. However, you can try any of the methods to fix the problem:

  • Clean the ink cartridge - The most basic reason for the ink cartridge not working is that it is dirty or wrongly put. So, please remove the cartridge, clean its gold contact on the electronic chip with a clean, lint-free cloth, and then gently place it in the slot.
  • Restart the printer - There might also be a problem with the printer, so turn off your HP printer, wait for a few seconds and then turn it back on. 
  • Try another HP ink cartridge - If you get the cartridge error, you should use another cartridge, an old one you have used or a new one, to see if the same problem persists.

Can you set up an HP printer without SETUP cartridges?

You can only set up an HP printer by setting up the ink cartridge. If you have purchased a new HP printer and want to make a print, then the printer only works once you have installed the ink cartridge setup, and if you do not get any setup ink cartridge, you should contact HP customer support

Is there a reset button on HP ink cartridges?

No, there is no reset button on any HP ink cartridge, but if you face an issue using the printer, remove it and put it back until it fits firmly on the slot, or refill the cartridge. If you still face any problems, try another cartridge.

How do I disable protected cartridge errors?

HP cartridge protection allows the cartridge to work on that particular printer, you can not use the same cartridge in another, and if you try to use it in another printer, it will show an error. To disable the HP cartridge protection, follow the below instructions: 

  • Open the settings of your HP printer on your laptop or computer.
  • Tap on the “HP cartridge protection” option.
  • Then click on the “Disable HP cartridge protection” option.
  • After that, protection will be disabled, and you can easily use the cartridge in another printer.  

Conclusion

 Hereafter if you have read the above information, you must have understood how to fix HP Printer Cartridge Error, and if you still need any help or have an issue, contact HP customer service. They will help you solve your problem.

Read Also:

HP Printer not Connecting to Computer

Comments 0

Leave A Comment

Copyright ©.All right reserved.